Chapter 2 – Overview
NCAN-02 Installation and Start-up Guide 2-3
Compatibility The NCAN-02 is compatible with the following ABB drives:
•ACS 400
• ACS 600 with Standard, System, Motion Control, Pump and Fan
Control, or Crane Application Program
• ACS 800 with Standard, System, Motion Control, Pump and Fan
Control, or Crane Application Program
• ACS 1000
• DCS 400
• DCS 500
• DCS 600.
Delivery Check The option package for the NCAN-02 CANopen Adapter Module
contains:
• CANopen Adapter Module, Type NCAN-02
• Shorting plug for power supply selection
• Two pairs (four pieces) of fibre optic cables for connecting the
adapter to the drive
• Mounting rail
• This manual.
Warranty and Liability
Information
The warranty for your ABB drive and options covers manufacturing
defects. The manufacturer carries no responsibility for damage due to
transport or unpacking.
In no event and under no circumstances shall the manufacturer be
liable for damages and failures due to misuse, abuse, improper
installation, or abnormal conditions of temperature, dust, or corrosives,
or failures due to operation above rated capacities. Nor shall the
manufacturer ever be liable for consequential and incidental damages.
The period of manufacturer's warranty is 12 months, and not more than
18 months, from the date of delivery. Extended warranty may be
available with certified start-up. Contact your local distributor for
details.
Your local ABB Drives company or distributor may have a different
warranty period, which is specified in their sales terms, conditions, and
warranty terms.
If you have any questions concerning your ABB drive, contact your
local distributor or ABB Drives office.
The technical data and specifications are valid at the time of printing.
ABB reserves the right to subsequent alterations.
To Next Page
Loading...
Need help?
General
