1MRS750527-MUM
REF 54_
7
Feeder Terminal
Technical Reference Manual, General
1. About this manual
1.1. Copyrights
The information in this document is subject to change without notice and should not
be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for
any errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from the use of this document,
nor shall ABB Oy be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written
permission from ABB Oy, and the contents thereof must not be imparted to a third
party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Copyright © 2005 ABB Oy
All rights reserved.
1.2. Trademarks
ABB is a registered trademark of ABB Group.
All other brand or product names mentioned in this document may be trademarks or
registered trademarks of their respective holders.
1.3. Guarantee
Please inquire about the terms of guarantee from your nearest ABB representative.
1.4. General
This document, REF 54_ Technical Reference Manual, General, provides a general
technical description of the feeder terminals REF 541, REF 543 and REF 545.
Version N of the Technical Reference Manual complies with REF 54_ feeder
terminals of Release 3.5. For information about the changes and additions included
in REF 54_, Release 3.5 compared to earlier releases,
refer to Section “Revision
History of REF 54_” on page 105.
For detailed information about the separate protection and other functions listed in
Section 5.1.1.1. , refer to the latest version of the CD-ROM “Technical Descriptions
of Functions”.
To Next Page
Loading...
Need help?
General
