ABB S800 User Manual

Section 3 Technical Data and Performance Supported I/O Modules and Drives via Advant Fieldbus
3BSE015969-600 A 159
Supported I/O Modules and Drives via Advant Fieldbus
100
The following I/O modules are supported by the Advant Fieldbus 100 Field
Communication Interface module CI810 and CI820:
• AI801, AI810, AI820, AI830, AI830A, AI835, AI890, AI895
• AO801, AO810, AO810V2, AO820, AO890, AO895
• DI801, DI810, DI811, DI814, DI820, DI821, DI830, DI831, DI885, DI890
• DO801, DO810, DO814, DO815, DI820, DO821, DO890
•DP820
• ABB Standard Drives
• ABB Engineered Drives
Supported I/O Modules and Drives via PROFIBUS and
CI801
The following I/O modules are supported by the PROFIBUS Field
Communication Interface module CI801:
• AI801, AI810, AI815, AI820, AI825, AI830, AI830A, AI835, AI843, AI845,
AI890, AI893, AI895
• AO801, AO810, AO815, AO810V2, AO820, AO845, AO845A, AO890,
AO895
• DI801, DI802, DI803, DI810, DI811, DI814, DI818, DI820, DI821, DI828,
DI840 (SOE handling not supported), DI890
• DO801, DO802, DO810, DO814, DO815, DO818, DO820, DO821, DO828,
DO840, DO890
• DP820, DP840
• ABB Standard Drives (Equipped with opto transmitter/receiver for up to 10
Mbit/s on the ModuleBus.)
– ACS600/ACS800 with standard application

ABB S800 Specifications

General

Manufacturer	ABB
Mounting	DIN Rail
Power Supply	24 V DC
Protection Class	IP20
Certifications	CE, UL, ATEX
Number of Channels	Varies depending on module type
Model	S800
Communication Protocols	Profibus DP, Modbus
Redundancy	Yes (depending on module and communication interface)