45
34OX_30-1600 rev. B / 1SCC303011M0201
1
LCD
4.1.2 Enter key, main menu
—
Fig. 4.6
By pressing Enter-key (3) you will move to the main
menu page of Operation, Parameters, Measurements,
Settings, Test and About, see the table below for
the selections. You can move in menu or choose
parameter values by Up and Down -keys (2) and by
Enter-key (3) you can accept function and enter a new
menu page. By Esc-key (1) you can go back in menu.
Information
When you have changed the parameter,
always go back in the menu by pressing Esc-
key and when prompted confirm changes with
Enter-key.
Main menu
Operation *Default
Bypass Time Delay
Bypass any currently running time delay
HMI Control Keys (I, II)
Enabled*
Disabled
Energy Counters Reset
To Next Page
Loading...
