Accu-Chek Inform II User Manual

50
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
3.2 Performing a patient glucose test
Overview of test procedure A patient glucose test comprises the following steps:
■ Enter the patient ID. This can be done either man-
ually or by using the barcode scanner.
■ Confirm that the test strip lot matches the test strips
in use (if configured).
■ Perform the test.
■ Optionally a test may be categorized as an
Observed Test Sequence (see page 225).

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing