Accu-Chek Inform II User Manual

56
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Confirming or selecting the test
strip lot
Once you have entered and confirmed the patient ID, you
are asked to choose the lot number for the test strips.
Compare the number displayed by the meter to the
number on the label of the test strip vial.
1 Select the lot number as follows:
■ To read the lot number from the test strip vial via
barcode scanner, press and release . Follow
the instructions for scanning IDs (see note below).
■ If you want to use the preselected lot number dis-
played by the meter, touch to confirm.
■ To use a different lot number than the one dis-
played, touch to display a list of stored lot
numbers. Select the desired lot number from the
list.
2 Touch to confirm the selected or scanned lot
number.
The meter can be configured so that no QC lockout
occurs when you switch between stored test strip lots.
However, the selected test strip lot must already have
passed a glucose control test.
A QC Lockout will still occur if a test strip lot is stored
in the meter but no glucose control test has been run.
A glucose control test must always be performed before
using a lot for the first time.
Patient Test
Patient 123456789
Use Strip L
ot
12:48 pm
123456?
03/17/17
Strip Lots
344789
545794
545777
344654
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Brand	Accu-Chek
Model	Inform II
Category	Blood Glucose Meter
Language	English