Accu-Chek Inform II User Manual

Patient Glucose Testing • 3
53
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Entering the patient ID manually Use the displayed keypad to enter the patient ID. You can
select characters in the same manner as when entering
an operator ID.
1 Touch the letters or numbers to enter the ID.
2 Use the following buttons to toggle between ranges
of characters:
– for letters A-O
– for letters P-Z
– for numbers 0-9
3 Touch to backspace and delete a character
entered incorrectly. Touch to delete the whole
entry. Touch to enter a space.
4 Touch to confirm, or touch to cancel this
procedure and return to the Main Menu.
■ If the patient ID you have entered is not valid (does
not match configured max/min length) an error
message is displayed. Confirming the error mes-
sage allows you to enter the ID again.
■ If the patient is not found in the downloaded list, a
decision message may be displayed (depending
on configuration, see Appendix A.1). Cancelling the
decision message also allows you to enter the ID
again.
■ Confirming the decision message allows you to
perform a test on the patient if the ID complies with
the configured maximum/minimum length.
However, the patient ID will not be automatically
added to the list.
ABCDE
FGH I J
KLMNO
P-Z123
Patient ID
12:48 pm
03/17/17
A-O
P-Z
123

Accu-Chek Inform II Specifications

General

Brand	Accu-Chek
Model	Inform II
Category	Blood Glucose Meter
Language	English