25
Turning off the system
There are two ways to turn off the server—via software or via
hardware. The software procedure below applies to a system running
on a Windows OS. For other OS shutdown procedures, refer to the
related user documentation.
To turn off the system via software:
1 Press Ctrl+Alt+Delete on the attached keyboard or click Start on
the Windows taskbar.
2 Select Shut Down.
3 Select Shut down from the drop-down menu, then click OK.
To turn off the system via hardware:
If you cannot shut down the server via software, press the power
button for at least four seconds. Quickly pressing the button may put
the server in a Suspend mode only.
To Next Page
Loading...
Need help?
General
