3 System upgrade
52
Installing the TPM module
The optional TPM module allows system administrators to enhance the
security of Altos G330 Mk2 system.
To install the TPM module:
1 Perform the pre-installation instructions described on page 30.
2 Locate the TPM module connector. If necessary, remove any boards
or cables that prevent access to it.
3 Remove the TPM module from its protective packaging, handling
it by the edges.
4 Install the TPM module.
(1) Insert the TPM module into the TPM module connector.
5 Observe the post-installation instructions described on page 30.
To Next Page
Loading...
Need help?
General
