4 System BIOS
56
Entering BIOS setup
1 Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2 During POST, press F2.
If you fail to press F2 before POST is completed, you will need to
restart the server.
The Setup Main menu will be displayed showing the Setup’s menu
bar. Use the left and right arrow keys to move between selections
on the menu bar.
BIOS setup primary menus
The tabs on the Setup menu bar correspond to the six primary BIOS
Setup menus, namely:
•Main
•Advanced
•Security
• Server
•Boot
• Exit
In the descriptive table following each of the menu screenshots,
settings in boldface are the default and suggested settings.
To Next Page
Loading...
Need help?
General
