Altos R720 Installation Configuration Guide 22
EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Drivers -> Altos R720 -> Graphics adapters -> ATI ES1000, select
Windows Server 2003 x64 and click on Setup.
3. Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
4. After installing the driver, you would see ATI ES1000 listed in Display
adapters.
Microsoft Scalable Networking Pack Installation
You can find the Microsoft Scalable Networking Pack for Windows Server 2003
x64 in the Microsoft website:
http://www.microsoft.com/downloads/details.aspx?FamilyID=778ee6fe-5359-
4c2f-b89d-f35f2b1b83cd&DisplayLang=en
1. Download the SNP from Microsoft website.
2. Double-click on the downloaded file to run the installation program.
3. Follow the instruction to install the SNP and reboot the server after the
SNP is installed.
RAID Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Integrated SAS hardware RAID, select
RAID Web Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Intel 82563EB Gigabit Controller, select
PROSet Utility (Windows Server 2003 x64) and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows Server 2003 Enterprise x64 Edition Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R720.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
To Next Page
Loading...
Need help?
General
