Altos R720 Installation Configuration Guide 30
listed in System devices.
VGA Driver Installation
1. Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD 7.1 build 100. Please insert the
EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Drivers -> Altos R720 -> Graphics adapters -> ATI ES1000, select
Windows Server 2003 and click on Setup.
3. Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
4. After installing the driver, you would see ATI ES1000 listed in Display
adapters.
Microsoft Scalable Networking Pack Installation
You can find the Microsoft Scalable Networking Pack for Windows Server 2003
in the Microsoft website:
http://www.microsoft.com/downloads/details.aspx?FamilyID=c65f4a89-f4da-
463e-a496-4b5abd660bf9&DisplayLang=en
1. Download the SNP from Microsoft website.
2. Double-click on the downloaded file to run the installation program.
3. Follow the instruction to install the SNP and reboot the server after the
SNP is installed.
RAID Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Integrated SAS hardware RAID, select
RAID Web Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Intel 82563EB Gigabit Controller, select
PROSet Utility (Windows Server 2003) and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows Server 2003 Enterprise Edition Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Windows Server 2003
Enterprise Edition on Altos R720.
To Next Page
Need help?
General
