Acer Altos R720 User Manual

Altos R720 Installation Configuration Guide 42
5. After installing the driver, you would see ATI ES1000 listed in Display
adapters.
RAID Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Integrated SAS hardware RAID 2, select
RAID Web Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2. Expand Utilities -> Altos R720 -> Intel 82563EB Gigabit Controller, select
PROSet Utility (Windows 2000) and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Red Hat Enterprise Linux 5.0 EM64T Installation (with integrated
SAS hardware RAID)
Below information describes how to manually install Red Hat Enterprise Linux
5.0 EM64T on Altos R720 with integrated SAS hardware RAID.
Drivers Required
For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are
required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID
00.00.03.09 EasyBUILD 8.0 build 100 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
7.6.5 EasyBUILD 8.0 build 100 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
IOAT 2.15 EasyBUILD 8.0 build 200 (or later)
Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
2.19-01 EasyBUILD 8.0 build 100 (or later)

Acer Altos R720 Specifications

General

Brand	Acer
Model	Altos R720
Category	Server
Language	English