87 Altos R720 Installation Configuration Guide
install.
4. At Prepare boot partition page, create one 500 MB DOS partition.
5. When you see the following message, please select Modify. Then, move
the cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
----------------------- --------------
Storage adapters: IDEATA, IDEATA, IDEATA
6. Please press Delete to delete below module
IDEATA.HAM Standard ATA/IDE RAID Adapter
7. Then, press INSERT key to insert the integrated SAS hardware RAID 2
driver. After the drivers are successfully loaded, please select Return to
driver summary.
8. Continue the installation.
9. When you see the following message, please select Modify. Then, move
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards:
NetWare Loadable Modules: (optional)
10. Please press INSERT key to insert the onboard Intel 82563EB Gigabit
Ethernet driver. After the drivers are successfully loaded, please select
Return to driver summary.
11. Then, you would see the following message. Please select Continue.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards: E1000E, E1000E
Network Loadable Modules: (optional)
To Next Page
Loading...
Need help?
General
