Machine Maintenance Procedures 3-13
6. Remove screws (D) from module bracket (E). (Figure 3-11)
Figure 3-11. ODD Module Bracket and Screws
7. Remove bracket from module.
ODD Module Installation 0
1. Install bracket (E) on module. (Figure 3-11)
2. Install and secure screws (D) to module bracket (E).
3. Install bezel (C) on module. (Figure 3-10)
4. Secure bezel locking latch to module tray.
5. Slide tray into module. (Figure 3-9)
6. Install module (B) in lower cover bay. (Figure 3-8)
7. Install and secure screw (A) to lower cover. (Figure 3-7)
8. Install battery.
ID Size Quantity Screw Type
A M2.5x6.0 1
D M2.0x3.0 2