Acer Aspire 8943G Series User Manual

Chapter 2 43
Miscellaneous Utilities
Using Boot Sequence Selector
Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot
Sequence Selector, perform the following steps:
1. Enter into DOS.
2. Execute BS.exe to display the usage screen.
3. Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to
change the boot sequence to HDD|CD ROM|LAN|Floppy.
Using DMITools
The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool
for hardware management.
When the BIOS displays Verifying DMI pool data it is checking the table correlates with the hardware before
sending to the operating system (Windows, etc.).
To update the DMI Pool, perform the following steps:
1. Enter into DOS.
2. Execute qdmi30a.exe. The following messages show dmitools usage:

Acer Aspire 8943G Series Specifications

General

Graphics	ATI Mobility Radeon HD 5850
Storage	Up to 1TB HDD
Operating System	Windows 7 Home Premium
Weight	4.6 kg (10.14 lbs)
LAN	Gigabit Ethernet
Card Reader	5-in-1 card reader
HDMI	Yes
Processor	Intel Core i7
Display	18.4-inch, 1920x1080
RAM	Up to 8GB DDR3
Optical Drive	Blu-ray Disc / DVD-Super Multi DL drive
Audio	Dolby Home Theater v3
Wireless	Wi-Fi 802.11b/g/n
Webcam	Acer Crystal Eye webcam
Battery	8-cell Lithium Ion (Li-Ion) 4800 mAh