39
EN
• Time settings: Press the “ON Time” or “OFF Time” button to view the time settings page. The user can set the times when the
unit should turn on/off automatically. N.B.: The times to start or stop the unit can be set at the same time, but must not be the
same.
• Add Exception : Press the “Exception Setting” button to access the Settings page of the schedule exception. After the
calendar appears, the user can select the date to activate or cancel the exception. Press
to save the selected date.
Notes: After the schedule exception has been set, the air conditioner does not execute the control order on the scheduled
exception date. The user can add more than one exception date.
• Add schedule: Press
to add a new schedule. At this point the schedule modification page appears so the user can set the relevant
parameters. NB: The user can add up to 28 schedules.
• Cancel schedule: press to cancel the selected schedule.
Press button on the homepage to access the LCI unit control page
Fig. 5.8 LCI unit control page
5.9. LCI UNIT CONTROL
No. Name Function
(1) LCI units list Indicates the list of LCI units controlled by the centralised controller
(2) LCI units icon
By pressing the icon of a unit, accesses the dedicated page for the control of the said unit
(Chapter 5.11); furthermore, the colour of the icon represents the status of the indoor unit
indicated (if the icon is dark the unit will be OFF, otherwise it will be ON); pressing the and
holding the icon will allow to enter the "name" and "icon" setting page assigned to the unit
(3) Operating mode icon
When the indoor unit is active, the current operating mode is displayed:
Auto Cooling Dehumidification Ventilation
Heating
(4) Set temperature When the indoor unit is active, the set temperature is displayed at this point.
To Next Page
Loading...
Need help?
General
