Agilent Technologies 54624A User Manual

4-47
MegaZoom Concepts and Oscilloscope Operation
To reset the label library to the factory default
To reset the label library to the factory default
1Press the Utility key, then press the Options softkey.
CAUTION Pressing the Default Library softkey will remove all user-defined labels from
the library and set the labels back to the factory default. Once deleted, these
user-defined labels cannot be recovered.
2Press the Default Library softkey.
This will delete all user-defined labels from the library and set the labels in the
library back to the factory default. However, this does not default the labels
currently assigned to the channels (those labels that appear in the waveform
area).
Defaulting labels without erasing the default library.
Selecting Default Setup in the Save/Recall menu will set all channel labels back to
the default labels (1, 2, D15-D0), but does not erase the list of user-defined labels in
the Library.

Agilent Technologies 54624A Specifications

General

Brand	Agilent Technologies
Model	54624A
Category	Test Equipment
Language	English