Agilent Technologies 54624A User Manual

1-14
Getting Started
To adjust the waveform intensity
To adjust the waveform intensity
The Intensity control is at the lower left corner of the front panel.
• To decrease waveform intensity, rotate the Intensity control counter-
clockwise.
• To increase waveform intensity, rotate the Intensity control clockwise.
Figure 1-1
Intensity control
The grid or graticule intensity on the display can be adjusted by pressing the
Display key, then turn the Entry knob (labeled on the front panel) to adjust
the Grid control.
BrightDim

Agilent Technologies 54624A Specifications

General

Brand	Agilent Technologies
Model	54624A
Category	Test Equipment
Language	English