282 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
18 Save/Recall (Setups, Screens, Data)
See Also • Chapter 15, “Mask Testing,” starting on page 243
To save arbitrary waveforms
Arbitrary waveform files can be saved to one of four internal (\Agilent
Flash) locations or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
Arbitrary Waveform data (*.csv).
2 Press the softkey in the second position and use the Entry knob to
navigate to the save location. See "To navigate storage locations" on
page 282.
3 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
See Also • "To edit arbitrary waveforms" on page 263
To navigate storage locations
When saving or recalling files, the softkey in the second position of the
Save Menu or Recall Menu, along with the Entry knob, are used to
navigate to storage locations. The storage locations can be internal
oscilloscope storage locations (for setup files or mask files) or they can be
external storage locations on a connected USB storage device.
The softkey in the second position can have these labels:
• Press to go — when you can push the Entry knob to navigate to a new
folder or storage location.
• Location — when you have navigated to the current folder location (and
are not saving files).
• Save to — when you can save to the selected location.
• Load from — when you can recall from the selected file.
When saving files:
Masks are also saved as part of setup files. See "To save setup files" on page 277.
To Next Page
Loading...
Need help?
General
