Agilent Technologies InfiniiVision 3000 X-Series User Manual

36 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
1 Getting Started
5. Tools keys
1. Power switch
2. Softkeys
3. [Intensity] key
4. Entry knob
6. Trigger controls
13. Waveform keys
18. Demo 2, Ground,
and Demo 1
terminals
17. Analog
channel
inputs
19. USB
Host
port
15. [Help] key
14. File keys
8. Run Control keys
12. Measure controls
11. Additional
waveform
controls
7. Horizontal controls
10. [Auto Scale] key
9. [Default Setup] key
16 Vertical controls21. Waveform
generator
output
20. Digital
channel
inputs
1. Power switch Press once to switch power on; press again to switch power off. See
“Power-On the Oscilloscope" on page 29.
2. Softkeys The functions of these keys change based upon the menus shown on the
display directly above the keys.
The Back/Up key moves up in the softkey menu hierarchy. At the
top of the hierarchy, the Back/Up key turns the menus off, and
oscilloscope information is shown instead.
3. [Intensity] key Press the key to illuminate it. When illuminated, turn the Entry knob to
adjust waveform intensity.
You can vary the intensity control to bring out signal detail, much like an
analog oscilloscope.
Digital channel waveform intensity is not adjustable.
More details about using the Intensity control to view signal detail are on
“To adjust waveform intensity" on page 131.
Back
Back

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English