Agilent Technologies Medalist i3070 5i Series User Manual

7-32 i3070 Series 5i Help
Removal
1 Follow the Safety Precautions for Removal.
2 Open the Zone 2 door.
3 Loosen the screw securing the coupling to the ballscrew.
Then loosen the locknuts.
4 Remove four screws securing the bearing block.
5 Remove six screws securing the ballscrew collar. The collar and
ballscrew can now be removed.
Locknuts
Screw
Screws on this side of the bearing block
Bearing Block

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English