Agilent Technologies Medalist i3070 5i Series User Manual

Maintenance
i3070 Series 5i Help 5-11
Drawer: Guide Shafts
The drawer assembly has four guide shafts at the corners.
1 Remove the testhead pod cover to access the guide shafts of the drawer
assembly.
2 Use a brush to lightly apply grease to the two guide shafts at the front.
3 Open the rear doors to lubricate the two guide shafts at the rear.
4 Close the doors.
Guide Shaft

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English