Agilent Technologies Medalist i3070 5i Series User Manual

Maintenance
i3070 Series 5i Help 5-7
Press: Runner Blocks
The Press has vertical guide rails at the four corners, with two runner
blocks along each rail.
1 Open the Zone 2 door to access the Press.
2 Use a grease gun to apply a small amount of grease to the four runner
blocks at the front.
3 Open the rear doors to lubricate the four runner blocks at the rear.
4 Close the doors.
Runner Block
Runner Block
Guide Rail
Guide Rails

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English