Agilent Technologies Medalist i3070 5i Series User Manual

i3070 Series 5i Help 7-45
3 The spring can now be removed.
Installation
1 Insert the spring guide and new spring.
2 Reinstall the movable rail assembly. On each side, tighten the four
screws at the base and make sure the rail assembly is properly aligned
before tightening the two screws at the top.
3 Close all covers/doors.
Spring and
Spring Guide

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English