26 N9310A User’s Guide
2 Getting Started
Firmware Update
Fol
low this procedure to finish the firmware update:
1 Download the firmware update package to the root directory
of your USB memory stick. Do not put this package into any
other folders when updating.
3 Insert this USB memory device into the USB connector
(DEV) of the signal generator
4 Power on your signal generator, the instrument will perform
the update process automatically.
After this procedure, you will get your signal generator with
latest version firmware. Press > Information to view the
current firmware version of your signal generator.
Utility
To Next Page
Loading...
Need help?
General
