Key Reference 4
N9310A User’s Guide 79
Sweep Trigger Pressing this softkey reveals a submenu of choices for
triggering a full sweep. Use this softkey to select triggering
immediately, triggering by the hardkey, or triggering on
either the positive or negative edge of a signal supplied to
the TRIGGER IN connector.
• Default value: Immediate
• Key sequence: > Sweep Trigger
Point Trigger Pressing this softkey reveals a submenu of choices for
triggering a sweep point- by- point. Use this softkey to select
the way triggering the next sweep point after the dwell time
of the previous point as triggering immediately and
automatically, or triggering by pressing the hardkey, or
triggering on either the positive or negative edge of a
external signal supplied to the TRIGGER IN connector.
• Default value:
Immediate
• Key sequence: > Point Trigger
Immediate This softkey is one of the choices in both the Sweep Trigger
and the Point Trigger submenu. If you set both the Sweep
Trigger and the Point Trigger to Immediate, the signal generator
initiates a sweep over all the points as soon as you select a
sweep mode (RF/LF/Ampl).
• Key sequence: > Sweep Trigger > Immediate
> Point Trigger > Immediate
Trigger key This softkey is one of the choices in both the Sweep Trigger
and the Point Trigger submenu. If you set both the Sweep
Trigger and the Point Trigger to key, the signal generator arms a
sweep as you select a sweep mode and requires you to press
the hardkey to initiate a sweep point by point.
• Key sequence: > Sweep Trigger > Trigger Key
> Point Trigger > Trigger Key
Tr i g g e r
Sweep
Tr i g g e r
Sweep
Sweep
Sweep
Tr i g g e r
Sweep
Sweep
To Next Page
Loading...
Need help?
General
