Agilent Technologies U1251A User's And Service Guide

Specifications 8
Agilent U1251A/U1252A User’s and Service Guide 163
Temperature and Capacitance Specifications
[1] The accuracy is specified as following condition:
• The accuracy does not include the tolerance of thermocouple probe. The
thermal sensor plugged into the meter should be placed in the operating
environment for at least an hour.
• Use Null function to reduce the thermal effect. Before using NULL function,
set meter to no ambient compensation ( ) mode and kept thermocouple
probe as close to the meter as possible, avoiding contact with any surface
that has a different temperature from ambient temperature.
• When measuring temperature with respect to any temperature calibrator,
try to set both the calibrator and meter with external reference (without
internal ambient compensation). If both calibrator and meter are set with
internal reference (with internal ambient compensation), deviation may
show between the readings of the calibrator and meter, due to differences
in ambient compensation between calibrator and meter.
[2] Only available in U1252A.
Function Thermocouple
Ty p e
Range Resolution Accuracy
± (% of reading + No. of
Least Significant Digit)
Tem pera tu re
(1)
K -200 – 1372 °C/
-328 – 2502 °F
0.1 °C/
0.1 °F
0.3 % +3 °C/
0.3 %+6 °F
J
(2)
-210 – 1200 °C/
-346 – 2192 °F
0.1 °C/
0.1 °F
0.3 % +3 °C/
0.3 %+6 °F
Function Range Resolution Accuracy
± (% of reading + Offset
Error)
Measuring Rate
At Full Scale
Max.
Display
Capacitance 10.000 nF 0.001 nF 1 %+8
4 times/sec.
11000
counts
100.00 nF 0.01 nF
1 %+5
1000.0 nF 0.1 nF
10.000 μF 0.001 μF
100.00 μF0.01 μF
1000.0 μF0.1 μF1 time/sec.
10.000 mF 0.001 mF 0.1 times/sec.
100.00 mF 0.01 mF 3 %+10 0.01 times/sec.

Agilent Technologies U1251A Specifications

General

Brand	Agilent Technologies
Model	U1251A
Category	Multimeter
Language	English