Agilent Technologies U1251A User's And Service Guide

82 Agilent U1251A/U1252A User’s and Service Guide
4 Changing The Default Setting
Selecting Setup Mode
To enter Setup mode, perform the following steps:
1. Turn meter OFF.
2. From OFF position, push and hold while turning
the rotary switch to any non- OFF position.
To change a menu item setting in Setup mode, perform the
following steps :
1. Push or to scroll through menu items.
2. Push or to scroll through available settings. See
Table 3, “Available setting options in Setup mode,” for
details of available options.
3. Push to save changes. These parameters remain in
the non- volatile memory.
4. Push for more than 1 second to exit Setup mode.
NOTE
When you hear a beep, the meter is in Setup mode and you can release

Agilent Technologies U1251A Specifications

General

Brand	Agilent Technologies
Model	U1251A
Category	Multimeter
Language	English