Agilent Technologies U1251A User's And Service Guide

86 Agilent U1251A/U1252A User’s and Service Guide
4 Changing The Default Setting
Setting Data Logging Mode
1. Set “Hand” to enable hand (manual) data logging mode.
2. Set interval within 0001~9999 seconds to enable interval
(automatic) data logging mode.
3. Push or to switch between manual and interval
data logging setup.
Figure 32 Data logging setup

Agilent Technologies U1251A Specifications

General

Brand	Agilent Technologies
Model	U1251A
Category	Multimeter
Language	English