8.2.5.2.1. EXTERNAL SENSOR CONNECTION
External sensors detect the surface
temperature of the tire via an IR temperature
sensor
Selecting the corresponding icon will open
the external sensor management page
The association of the sensor with the
device is achieved via the serial number
engraved on the outside of the IR
temperature sensor
Before connecting, turn on the infrared
sensors by passing a magnet near the LED
The red LED will indicate that the wireless
sensor is turned on. To turn off the sensor,
bring the magnet close to the LED again
Once all the sensors you want to connect to
the Alfano 7 are switched on, press the top
right button for one second to start the
pairing process
If you do not want to associate a sensor for
one or more wheels, keep the serial
number on "----" and press the "ok" button
to confirm and move on to the next wheel
38
8. Settings
8.2.5.2. EXTERNAL SENSORS
8.2.5. WIRELESS WHEEL SENSORS
Using the lower and upper left buttons,
set the serial number of the sensor you
want to associate with the wheel:
-
-
-
-
FL
FR
RL
RR
Front Left Wheel
Front Right Wheel
Rear Left Wheel
Rear Right Wheel
Press 'ok' to move to the next wheel
8.2. Alfano 7 Settings, Connected Sensors and Boxes
To Next Page
Loading...
Need help?
General
