Alfano 7 User Manual

8.2.2. TRANSMISSION
To initiate the device's learning process to recognize the engaged gear, click on 'Start
learning'
Configuration can be done in two ways:
Using only the RPM cable, in this case the GPS speed will be utilized to calculate the
engaged gear
Using RPM cable and magnetic speed sensor (A2203)
For a more precise reading we recommend configuration via a magnetic speed sensor
The Alfano 7 automatically detects the presence of a magnetic speed sensor and selects the
most accurate configuration method. Therefore, no action is required to select the
configuration method
8.2.2.1 Engaged Gear Configuration
Calibration on the trolley is recommended for configurations that use a magnetic speed
sensor, while entering the track is necessary for configurations that use GPS speed
31
By clicking “Ok” on “Start learning” the first
screen of the configuration process will be
displayed
8. Settings
8.2. Alfano 7 Settings, Connected Sensors and Boxes
On this page you can set the type of vehicle transmission between direct/clutch and gearbox
By setting a vehicle with gearbox, you can enter the number of gears and configure the
device so that it detects the gear engaged

Alfano 7 Specifications

General

Brand	Alfano
Model	7
Category	Measuring Instruments
Language	English