8.5.4.4. BEST PARTIAL + RPM CHANNEL
54
8. Settings
In this case:
During the lap: the LEDs will indicate the
RPM (the thresholds and colors on which the
LEDs will be based are those set in the RPM
channel, see page 52)
Crossed a sector line: LEDs indicate the delta
from the best corresponding sector of the
session for the time set in this screen (3 to 20
seconds)
Time after which the engine RPM will be
communicated again
Explanations and examples of how LEDs communicate time gaps on page 21
The 6 LEDs system can be set to communicate two types of information at the same time
(as explained on page 21)
8.5. Visual Aspect Settings
8.5.4. 6 LEDs SYSTEM THRESHOLDS
To Next Page
Loading...
Need help?
General
