In automatic mode the device works only via GPS for timing the lap and split times (if
present on the track in use)
9.1.1. Track In the Alfano Database
9.1.2. Track Not in memory
9.1. AUTOMATIC MODE
This mode was developed so that the Alfano 7
automatically recognises the situation it is in
and without the need for any intervention by
the user makes the correct decisions to record
a session
Once the device detects the GPS signal, it will
identify its location
If the Alfano 7 is located on a track in
memory (Alfano database or personal
database) the device will set this circuit
As soon as you cross the finish line it will
begin recording the session and attribute it
to the correct circuit
If the track is not stored in memory, the device will display the closest known track
Once the device enters the track, it will automatically start learning the new track and
recording data from the second lap
The device will save the automatically generated circuit in memory, so that next time I will
be known to Alfano 7
The track will be saved with the name “*P*
TRACK GPS DD/MM/YY hh/mm“
It can be renamed and modified by adjusting
the finish line and adding split times (refer to
page 65)
60
9. Alfano Mode
To Next Page
Loading...
Need help?
General
