8.5.6. DELETE PICTURE ON IGNITION
8.5.5. LED ALARM LEFT/RIGHT MAX/MIN
The Alfano 7 features 2 upper LEDs that are specifically designed to indicate temperature
alarms. Each LED can be programmed to signal either a temperature that is too low or too
high, allowing for a maximum of 4 temperature alarms in total (2 for each LED)
The four alarms are independent.
If a Box12 is connected, they can refer to four
different temperatures
Similarly, the maximum and minimum alarms
of the same LED are not dependent, and one
can be active while the other is inactive
For each of these 4 alarms it is possible to set:
The alarm reference temperature (the options include the disabled item)
The threshold value above which (maximum alarm) or below which (minimum alarm)
the LED turns on
The color of the alarm LED
The type of visual message (slow flashing, fast flashing or steady on)
If you have added a custom power-on image using ADA, you can remove it using this menu
If a customized image is present, the word 'OK' will appear at the top left. To remove the
image, press and hold for 3 seconds
55
8. Settings
8.5. Visual Aspect Settings
To Next Page
Loading...
Need help?
General
