Alfano 7 User Manual

9. Alfano Mode
The Alfano 7 has 4 operating modes:
Automatic
Professional
Magnetic Classic
Track Open
Modes can be selected from the homepage by
accessing the mode selection screen through the
left center button
When operating in automatic mode, the Alfano 7
requires no adjustments
The device can identify the track it is on by
utilizing its memory of over 5000 tracks, and will
begin recording data immediately upon entering
the track.
If a track is not in the memory, the device creates
one automatically
The professional mode allows the creation and
modification of GPS or GPS+Mag/IR tracks down
to the smallest details
In professional mode the correct track must be
selected before departure
The classic magnetic mode allows only the use of
the magnetic/IR sensor
Tracks need to be created and can be saved in
memory
The correct track must be selected before the start
The track open mode allows the use of the Alfano
7 on tracks where the start and end points do not
coincide
You can set the parameters according to which the
device should start and end the recording of a
session
AUTOMATIC MODE
PROFESSIONAL MODE
MAGNETIC MODE
OPEN TRACK MODE
59

Alfano 7 Specifications

General

Brand	Alfano
Model	7
Category	Measuring Instruments
Language	English