Allen-Bradley 1734-OBV2S User Manual

Rockwell Automation Publication 1734-UM013N-EN-P - September 2017 81
Configure the Module in a GuardLogix Controller System Chapter 5
5. To edit the Module Definition, click Change.
a. In the Revision fields, choose the major and minor revisions.
b. From the Electronic Keying pull-down menu, choose the appropriate
keying method.
6. Click OK.
The I/O Configuration tree displays the Ethernet connection.
Add and Configure the 1734
Ethernet Adapter
1. Right-click the Ethernet connection and choose New Module.
2. On the Select Module dialog box, check Communication and
Allen-Bradley.
3. Choose an Ethernet adapter from the list and click Create.
Choose Description
Compatible Module Allows a module to determine whether it can emulate the module
that is defined in the configuration that is sent from the controller.
Disable Keying None of the parameters in the physical module and module that is
configured in the software must match.
Do not choose Disable Keying.
Exact Match All parameters must match or the inserted module rejects a
connection to the controller.

Allen-Bradley 1734-OBV2S Specifications

General

Brand	Allen-Bradley
Model	1734-OBV2S
Category	Control Unit
Language	English