10 Rockwell Automation Publication 2100-IN012G-EN-P - August 2016
Preface
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page
.
To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
The documents in the following table are referenced in this document and can
be obtained from their respective organizations.
Purchased Components and
Additional Instruction Sheets
When equipment such as transformers, metering, programmable controllers,
or drives are supplied with the motor control center (MCC), specific
publications are shipped with the units. Read and understand these documents
before installing and operating the MCC.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state Control
Installation Instructions, publication SGI-1.1
Provides safety guidelines for the application, installation, and maintenance of solid-
state control.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.rockwellautomation.com/global/
certification/overview.page
Provides declarations of conformity, certificates, and other certification details.
Resource Description
Resource Website
National Electrical Manufacturer’s Association (NEMA)
• NEMA ICS 1-2000 Industrial Control and Systems: General Requirements
• NEMA ICS 2.3-1995, Instructions for Handling, Operation and Maintenance of
Motor Control Centers Rated Not More Than 600V
http://www.nema.org
National Fire Protection Association (NFPA)
• NFPA 70 - National Electrical Code
• NFPA 70A - Recommended Practice for Electrical Equipment Maintenance
• NFPA 70E - Standard for Electrical Safety in the Workplace
http://www.nfpa.org
Institute of Electrical and Electronic Engineers (IEEE)
IEEE standard C37.20.7 - IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up
to 38 kV for Internal Arcing Faults
http://www.ieee.org
To Next Page
Need help?
General
