Allen-Bradley CENTERLINE 2100 User Manual

52 Rockwell Automation Publication 2100-IN012G-EN-P - August 2016
Chapter 4 Installing and Removing Plug-in Units
Remove a Plug-in Unit with a
Vertical Operating Handle
from a Section
To remove a unit, follow this procedure.
1. Make sure the disconnect handle is in the OFF/O position.
2. For non-arc resistant units, turn the door latches 1/4 turn; for units that
are equipped with arc-resistant door latches, push in the latch and rotate
1/4 turn.
Arc Containment Latch

Allen-Bradley CENTERLINE 2100 Specifications

General

Brand	Allen-Bradley
Model	CENTERLINE 2100
Category	Control Unit
Language	English