Rockwell Automation Publication 2100-IN012G-EN-P - August 2016 19
General Information Chapter 1
V 2162Q, 2163Q,
2164Q, 2165Q
Redesign of 240-480V PowerFlex
®
70 and release of 600V PowerFlex 70 April 2002
2162R, 2163R,
2164R, 2165R
Original release of PowerFlex 700 July 2002
2154H, 2155H Original release of SMC™-3 November 2002
2154J, 2155J Original release of SMC Flex April 2004
2112, size 3, 4 and 5 Redesign to reduced space factor with Class J fuse clip April 2004
2162T, 2163T Original release of PowerFlex 40 September 2004
2107, 2113, size 3 Reduced space factor April 2005
X 2162Q, 2163Q Reduced space factor, changed CCT with integral fuses April 2005
All sizes 800F pilot devices August 2005
Y 2154J, 2155J, 108 A
and 135 A
Redesign to change units from frame mounted to plug-in March 2006
2164Q, 2164R,
2165Q, 2165R
(Drive with manual
bypass)
Redesign for change from SMP overload relay to E1Plus overload relay August 2006
2107, 2113, size 2
and 3
Redesign due to starter component series letter change December 2009
Z Changed to Bulletin 140G and 140MG circuit breakers. December 2013
(1) Replacement and renewal parts are no longer supported. For more information contact Rockwell Automation LV MCC Technical Support at 1.440.646.5800 and follow the prompts to Allen-Bradley >
Low Voltage Motor Control Centers > Post Shipment Support.
Table 2 - 2100 Units
Series
Letter
Scope Description of Change Date Implemented in
U.S.
Table 3 - 2400 Units
Series
Letter
Scope Description of Change Date Implemented
in U.S.
A — Original design June 1990
B 18A, 24A, 30A Changed to series B, Bulletin 194R, 30 A disconnect March 1992
C 18A, 24A, 30A Changed to three Bulletin 800E pilot devices on 0.5 space factor units July 1992
D All sizes New disconnect external auxiliary contacts and new 600 A...1200 A circuit breaker operating mechanism February 1996
16A-85A Original design of units with a Bulletin 100-C contactor September 1999
To Next Page
Loading...
Need help?
General
