Alto-Shaam Vector VMC-F3E Service Manual

ASSEMBLY/DISASSEMBLY
Ve ctor F® Se ries ▪ S ervice Ma nual ▪ M N- 46 89 5 ▪ R ev 1 ▪ 7/ 20
100
Removing and Installing a Heater Element
Before you begin ▪ The oven must be disconnected from electric power.
▪ Have a replacement heater element.
Procedure To remove and install a heater element, do the following.
Step Action
1. Remove the side service panel.
2. Disconnect the heater element wires.
Continued on next page
WARNING: Electric shock hazard.
Disconnect the appliance from electric power before servicing
the appliance.
VMC-TS-010677
VMC-TS-002958

Alto-Shaam Vector VMC-F3E Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-F3E
Category	Oven
Language	English