Alto-Shaam Vector VMC-F3E Service Manual

TESTING
Ve ct or F ® Se ries ▪ S ervice Man ual ▪ MN -4 6 895 ▪ R ev 1 ▪ 7/ 20
67
Continued from previous page
3. Insert the meter leads c into the probe connector. The measurement
should be between 99 and 101 ohms at 32°F (0°C).
Result The probe has now been tested.

NOTE: If the measurement is not between 99 and 101
ohms, replace the faulty probe.
VMC-TS-003723
c
100

Alto-Shaam Vector VMC-F3E Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-F3E
Category	Oven
Language	English