AMX NXT-CV10 User Manual

CV10 Touch Panel Accessories
28
10" Modero Touch Panels
3. Carefully insert the NXT-BP into the base until the battery securely fits onto the Battery Connector Port.
Installing the NXA-BASE/1 below an NXT-CV10 Panel
1.
Power Off the panel before attempting to attach the NXA-BASE/1.
2. Place the battery base (with battery) onto a flat/level surface.
3. Turn the battery locking slider (FIG. 30) to one side until the locking mechanism is horizontal to the base
(going left to right) and the rear battery latch is pointing directly outward (away from the LCD).
4. Carefully angle the NXT-CV10 panel over the front alignment pegs (FIG. 31). The pegs assist in both
aligning and securing the panel to the base (the locking mechanism secures the base to panel when done).
FIG. 29 Battery installation
FIG. 30 NXA-BASE/1 showing Panel Interface and connector locations
NXT-BP Battery
Battery
Connector
Battery
Connector
Port
FRONT
Panel Interface
connector (male)
Securing
pegs (2)
Front
Back
Battery
locking
mechanism
Battery
locking slider
Insert holes for
NXT-CV10 feet
Alignment
pegs (2)
(Battery not shown
for illustration purposes)

AMX NXT-CV10 Specifications

General

Dimensions (WxDxH)	283 x 84 x 202 mm
Ethernet LAN (RJ-45) ports	1
Pixel pitch	0.28 x 0.28 mm
Aspect ratio	16:9
Screen shape	Flat
Display diagonal	10 \
Display brightness	350 cd/m²
Display resolution	800 x 480 pixels
Contrast ratio (typical)	350:1
USB Type-A downstream ports quantity	2
Certification	FCC 15 B, CE, EN60950
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
NVIDIA G-SYNC	No

Weight and Dimensions

Weight (without stand)	1200 g