APRILIA M245M User Manual

ENGINE
3 - 118
En
g
ines M192M / M191M / M245M / M234M / M282M / M281M
3.6.32. ASSEMBLING THE THERMOSTAT
• Position thermostat with the bleed hole in the highest
position.
• Make sure that rubber seal is correctly positioned.
• Fit thermostat cover with the union for carburetor heat-
ing tube facing the flywheel.
• Tighten the screws to the specified torque values.
TIGHTENING TORQUE VALUES
Screws: 3 ÷ 4 Nm

APRILIA M245M Specifications

General

Brand	APRILIA
Model	M245M
Category	Engine
Language	English