APRILIA M245M User Manual

ENGINE
3 - 36
En
g
ines M192M / M191M / M245M / M234M / M282M / M281M
3.1.33. INSTALLING THE DRIVEN PULLEY SHAFT
BEARING
• Warm the half case with the heat gun.
• Fit a new driven pulley shaft bearing with its balls visi-
ble from inside the hub.
• Fit the snap ring with its open side opposite to the
bearing.
• Fit a new oil seal flush with the case on the pulley side.

APRILIA M245M Specifications

General

Brand	APRILIA
Model	M245M
Category	Engine
Language	English