APRILIA RSV 1000 R FACTORY User Manual

use and maintenance RSV 1000 R - RSV 1000 RFACT
USA USA
102
u Rest one foot on the rear part of the
stand (8).
u Push the stand (8) downwards until it
reaches the end of its stroke (see figure).
WARNING
Make sure that the vehicle is stable.
If it falls over, it may cause damage to
bystanders and other property, as well
as being damaged itself.
PLACING THE VEHICLE ON THE
FRONT SUPPORT STAND
u Place the vehicle on the appropriate rear
support stand , see page 101
(PLACING THE VEHICLE ON THE
REAR SUPPORT STAND) .
u Lift the front part of the stand (8) and
insert each of its ends (9) into holes (10)
in the bottom of the front fork.
u Rest one foot on the front part of the
stand (8).
u Push the stand (8) downwards until it
reaches the end of its stroke (see figure).
WARNING
Make sure that the vehicle is stable.
If it falls over, it may cause damage to
bystanders and other property, as well
as being damaged itself.
FRONT WHEEL
WARNING
The disassembly and reassembly of the
front wheel can be difficult for those
unfamiliar with vehicle maintenance.
You may wish to have your Local april-
ia Dealer carry out these operations.
If you wish to perform these operations
yourself, carefully read page 80
(MAINTENANCE).
While disassembling and reassembling
the wheel, pay extra care not to damage
the brake lines, discs or pads.
Before carrying out the following
operations, let the engine and the
exhaust silencer cool down until they
reach room temperature.
Failure to observe this warning can lead
to serious burns.
8
10
9
41
2
3
APRum_RSV1000R##06_####.book Page 102 Monday, February 6, 2006 2:48 PM

APRILIA RSV 1000 R FACTORY Specifications

General

Brand	APRILIA
Model	RSV 1000 R FACTORY
Category	Motorcycle
Language	English