EasyManuals Logo

APRILIA RSV 1000 R FACTORY User Manual

APRILIA RSV 1000 R FACTORY
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background image
127
use and maintenance RSV 1000 R - RSV 1000 RFACT
USA USA
It is important to check the charge
periodically (about once a month), during
the winter or when the vehicle is not used,
in order to prevent the deterioration of the
battery.
u Recharge it completely with a normal
charge, see page 128 (RECHARGING
THE BATTERY).
u While we recommend removing the
battery from the vehicle, if you must
leave it in your vehicle, disconnect both
battery cables.
CHECKING AND CLEANING
THE TERMINALS
Carefully read page 126 (BATTERY).
u Make sure that the ignition switch is in
the “ ” (OFF) position.
u Remove the rider saddle, see page 111
(REMOVING THE RIDER SADDLE).
u Remove the red rubber boot (1).
u Make sure that the cable terminals (2)
and the battery terminals (3) are:
in good condition (and not corroded or
covered with deposits);
covered with neutral grease or Vaseline.
If it is necessary to clean the battery
terminals and the cable terminals:
u Remove the battery, see page 127
(REMOVING THE BATTERY).
u Brush the cable terminals (2) and the
battery terminals (3) with a wire brush to
eliminate any sign of corrosion.
u Install the battery, see page 128
(INSTALLING THE BATTERY).
REMOVING THE BATTERY
CAUTION
When the battery is removed, the digital
clock and red line setting will be reset to
zero. See page 34 (MULTIFUNCTION
COMPUTER) for instructions on how to
set clock and red line.
Read page 126 (BATTERY) carefully.
u Ensure the ignition switch is in the " "
position.
u Remove the rider saddle, see page 111
(REMOVING THE RIDER SADDLE).
u Release and remove the negative (-)
terminal screw (1).
u Slide the negative lead (2) aside.
u Lift the red protective cap (3).
u Release and remove the positive (+)
terminal screw (4).
u Slide the positive lead (5) aside.
u Release and remove the two screws (6).
u Remove the battery retaining bracket
(7).
u Grasp the battery (8) firmly and lift it out of
its mount.
CAUTION
Once it has been removed, store the
battery in a safe place and keep it away
from children. Even a completely sealed,
maintenance free battery can present a
danger of injury.
u Place the battery on a level surface, in a
cool, dry place.
u Refit the rider saddle, see page 111
(REMOVING THE RIDER SADDLE).
NOTE To reinstall the battery, see
page 128 (INSTALLING THE BATTERY).
CHECKING
THE ELECTROLYTE LEVEL
Carefully read page 126 (BATTERY).
Your vehicle is equipped with a sealed
maintenance-free battery that does not
require checking of the battery level.
1
2
2
3
4
3
1
7
2
8
6
5
APRum_RSV1000R##06_####.book Page 127 Monday, February 6, 2006 2:48 PM

Table of Contents

Other manuals for APRILIA RSV 1000 R FACTORY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RSV 1000 R FACTORY and is the answer not in the manual?

APRILIA RSV 1000 R FACTORY Specifications

General IconGeneral
Engine TypeV-Twin, 4-stroke
Displacement998 cc
Transmission6-speed
Max Power143 hp (107 kW) @ 10, 000 rpm
Max Torque107 Nm at 7500 rpm
Front SuspensionÖhlins upside-down fork
Rear SuspensionÖhlins monoshock
Front BrakesDual 320 mm discs
Rear BrakesSingle 220 mm disc
Dry Weight185 kg
Fuel Capacity18 liters
FrameAluminum twin spar

Related product manuals