EasyManuals Logo
Home>APRILIA>Motorcycle>RSV 1000 R FACTORY

APRILIA RSV 1000 R FACTORY User Manual

APRILIA RSV 1000 R FACTORY
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
use and maintenance RSV 1000 R - RSV 1000 RFACT
USA USA
68
PRELIMINARY CHECKING OPERATIONS CHART
Component Check Page
Front and rear disc
brakes
Check brake operation, lever and pedal play, fluid levels. Check the pads for excessive wear, check
the discs for condition. If the discs are unduly scored or show signs of heat discoloration, do not ride
the vehicle. Check both brake systems for evidence of leaks. If there are leaks, do not ride the
vehicle.
page 4 (BRAKE FLUID), page 51
(BRAKES), page 52 (DISC
BRAKES), page 53 (FRONT
BRAKE), page 54 (REAR BRAKE).
Throttle Make sure that it works smoothly and that it is possible to open and close it completely, in all steering
positions. If necessary, adjust and/or lubricate it.
page 120 (ADJUSTING THE
THROTTLE CONTROL), .
Engine oil Check and/or top up if necessary. page 49 (LUBRICANTS), page 3
(USED ENGINE OIL), page 90
(CHECKING THE ENGINE OIL
LEVEL AND TOPPING UP).
Wheel/tires Check the tire tread inflation pressure, and look for any wear and tear or damage.
Remove any foreign matter that may be stuck in the tread grooves.
Inspect the rims, spokes and hubs for cracks, looseness or damage. Do not ride the vehicle if there
is even the slightest defect in either of the wheels.
page 62 (TIRES).
Brake lever and pedal Make sure they work smoothly and are properly lubricated. page 59 (ADJUSTING THE
CLEARANCE OF THE REAR
BRAKE LEVER).
Steering Make sure that the fork head rotates through its entire range without fouling of any kind.
Make sure that the fork stops touch the frame at full left and full right fork lock.
page 96 (STEERING DAMPER).
Clutch Check the operation of the clutch lever, the fluid level and any leaks.
If necessary, top up the fluid. Ensure that the clutch operates without jerking or slipping.
page 96 (STEERING DAMPER).
Side stand Make sure that it works smoothly and that the spring tension brings it back to its normal position. If
necessary, lubricate joints and hinges. Make sure that the safety switch on the side stand operates
correctly.
page 92 (CHECKING THE SIDE
STAND), page 92 (CHECKING THE
FUNCTIONING OF THE SAFETY
SWITCH ON THE SIDE STAND).
Component nuts, bolts
and other fasteners
Check that all fasteners are tight and properly torqued. page 80 (MAINTENANCE).
Drive chain Check the slack and the conditions of the chain at both sprockets. page 109 (DRIVE CHAIN), page 111
(CLEANING AND LUBRICATION).
Fuel tank Check the fuel level and top up if necessary.
Make sure that there are no fuel leaks. Make sure that the filler cap is properly closed.
page 48 (FUEL), page 111 (LIFTING
THE FUEL TANK).
Coolant With the engine cold, check the coolant level. Make sure that it is at the prescribed level. page 4 (COOLANT), page 60
(COOLANT).
Engine stop switch
(-)
Make sure that it functions correctly. 43 ENGINE STOP SWITCH
(-).
Lights, warning lights and
electrical devices
Check the proper functioning of all the lights and the horn.
Do not ride if any of these are not functioning properly.
page 4 (BATTERY HYDROGEN
GAS AND ELECTROLYTE),
page 126 (BATTERY) – page 132
(CHANGING THE HEADLIGHT
BULBS).
APRum_RSV1000R##06_####.book Page 68 Monday, February 6, 2006 2:48 PM

Table of Contents

Other manuals for APRILIA RSV 1000 R FACTORY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RSV 1000 R FACTORY and is the answer not in the manual?

APRILIA RSV 1000 R FACTORY Specifications

General IconGeneral
BrandAPRILIA
ModelRSV 1000 R FACTORY
CategoryMotorcycle
LanguageEnglish

Related product manuals