Askey SAX1V1K User Manual

60
14. Enable pool: Enable/Disable ipv6 pool.
15. Enable Pool Setting For Lan Host: Enable to set DHCP pool start and end values
for client IPv6 address assign range, it’s disable by default.
16. DHCP Pool Start: DHCP pool start values for client IPv6 address.
17. DHCP Pool End: DHCP pool end values for client IPv6 address.
18. PD-Valid Lifetime: Prefix delegation for valid lifetime.
19. PD-Preferred Lifetime: Prefix delegation for preferred lifetime.
20. LAN IPv6 MTU: Set MTU for LAN-side devices.
21. Connect to DNS Server Automatically: Choose to acquire the DNS from uplink.
22. IPv6 DNS Server 1: IPv6 address for DNS server.
23. IPv6 DNS Server 2: IPv6 address for DNS server.
24. IPv6 DNS Server 3: IPv6 address for DNS server.
25. Port Ranges Valid for Port Forwarding: The "port ranges" are set by Map-T mode,
and the port setting for port forwarding must be in these ranges.
26. Click Apply.
2.4.1.5 Parental Control
Refer to 2.3.5 Parental Control for relevant setting descriptions.
2.4.1.6 Multicast
Enable multicast. The sender and receiver can implement point-to-multipoint
connections.

Askey SAX1V1K Specifications

General

Brand	Askey
Model	SAX1V1K
Category	Wireless Router
Language	English