Askey SAX1V1K User Manual

61
Steps to set up Multicast:
1. From the navigation panel, go to Advanced > Network > Multicast.
2. IPv4 Multicast Route: Select an IPv4 Multicast Route.
*IGMP Proxy: IGMP Proxy enables hosts in a unidirectional link routing (UDLR)
environment that are not directly connected to a downstream WiFi Router to join a
multicast group sourced from an upstream network.
*PIM: PIM-Source-specific multicast (SSM) is used in IPv4/IPv6 and is a method of
delivering multicast packets in which the only packets that are delivered to a
receiver are those originating from a specific source address requested by the
receiver. By limiting the source, SSM reduces demands on the network and
improves security.
3. IPv6 Multicast Route: Select an IPv6 Multicast Route.
*MLD Proxy: The MLD proxy is used in IPv6 environments. This feature enables a
device to learn proxy group membership information, and forward multicast

Askey SAX1V1K Specifications

General

Brand	Askey
Model	SAX1V1K
Category	Wireless Router
Language	English